Lab 12. EIGRP – Redistribution – OSPF

Lab 12. EIGRP – Redistribution – OSPF

Hampir sama dengan Lab sebelumnya, hanya saja dilab ini kita akan menghubungkan routing protokol EIGRP dengan OSPF.

Kita bisa melanjutkan Lab sebelumnya dengan hapus routing RIP sebelumnya dan diganti dengan routing OSPF

Router-1(config)#no router rip

Router-1(config)#router ospf 10

Router-1(config-router)#network 1.1.1.1 0.0.0.0 area 0

Router-1(config-router)#network 100.100.100.100 0.0.0.0 area 0

Router-1(config-router)#exit

Redistribute ke dalam EIGRP.

Router-1(config)#router eigrp 10

Router-1(config-router)#redistribute ospf 10 metric 1 1 1 1 1

Cek di R3

Router-3#sh ip route eigrp
        1.0.0.0/32 is subnetted, 1 subnets
D EX     1.1.1.1 [170/2560005376] via 23.23.23.2, 00:03:39, FastEthernet0/0
        2.0.0.0/32 is subnetted, 1 subnets
D        2.2.2.2 [90/156160] via 23.23.23.2, 01:58:03, FastEthernet0/0
        12.0.0.0/24 is subnetted, 1 subnets
D        12.12.12.0 [90/30720] via 23.23.23.2, 01:58:03, FastEthernet0/0
         100.0.0.0/32 is subnetted, 1 subnets
D EX     100.100.100.100

           [170/2560005376] via 23.23.23.2, 00:03:39, FastEthernet0/0

Router-3#ping 1.1.1.1

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 40/43/56 ms